10/11/2022,20:28:25,$HST:Application just created
10/11/2022,20:28:25,$HST:SW-version 1.24, e-Callisto
10/11/2022,20:28:25,$HST:Configurationfile read
10/11/2022,20:28:25,$HST:Switched to automatic
10/11/2022,20:28:25,$HST:ATmega16 pre-configured
10/11/2022,20:28:25,$HST:Frequencyfile frq00470.cfg
10/11/2022,20:28:25,$HST:Callisto ready now...
10/11/2022,20:28:26,$HST:Measurement idle
10/11/2022,20:28:26,$HST:File scheduler.cfg read
10/11/2022,20:28:26,$HST:No more entries in scheduler.
10/11/2022,20:28:26,$HST:Measurement enable
10/11/2022,20:28:26,$CRX:AGC gain = 4.78V
10/11/2022,20:28:26,$CRX:Emitter BF199 = 0.14V
10/11/2022,20:28:26,$CRX:Analog Input = 16.48
10/11/2022,20:28:32,$HST:File FRQ00470.CFG read
10/11/2022,20:28:32,$HST:No calibration file found
10/11/2022,20:28:32,$HST:Plot buffer erased...
10/11/2022,20:28:32,$HST:Parametrisation RCU
10/11/2022,20:28:33,$CRX:V1.8 / 2012-04-02
10/11/2022,20:28:33,$HST:Found LO=25.43 MHz
10/11/2022,20:28:33,$CRX:Debug=Off
10/11/2022,20:28:33,$CRX:Trigger=Extern
10/11/2022,20:28:33,$CRX:FPUcodex=2
10/11/2022,20:28:33,$CRX:GS =0
10/11/2022,20:28:33,$CRX:GA =624
10/11/2022,20:28:33,$CRX:Delay=0msec
10/11/2022,20:28:33,$CRX:Frequency=45.0MHz
10/11/2022,20:28:33,$HST:Receiver connected
10/11/2022,20:28:33,$CRX:Sweeplength=200
10/11/2022,20:28:33,$CRX:low_band_max=171MHz
10/11/2022,20:28:33,$CRX:mid_band_max=450MHz
10/11/2022,20:28:33,$CRX:high_band_max=863MHz
10/11/2022,20:28:33,$CRX:Idle=0
10/11/2022,20:28:33,$CRX:V1.8 / 2012-04-02
10/11/2022,20:28:33,$HST:Found LO=25.43 MHz
10/11/2022,20:28:33,$CRX:Debug=Off
10/11/2022,20:28:33,$CRX:Trigger=Extern
10/11/2022,20:28:33,$CRX:FPUcodex=2
10/11/2022,20:28:33,$CRX:GS =0
10/11/2022,20:28:33,$CRX:GA =624
10/11/2022,20:28:33,$CRX:Delay=0msec
10/11/2022,20:28:33,$CRX:Frequency=45.0MHz
10/11/2022,20:28:33,$HST:Receiver connected
10/11/2022,20:28:33,$CRX:Sweeplength=200
10/11/2022,20:28:33,$CRX:low_band_max=171MHz
10/11/2022,20:28:33,$CRX:mid_band_max=450MHz
10/11/2022,20:28:33,$CRX:high_band_max=863MHz
10/11/2022,20:28:33,$CRX:Idle=0
10/11/2022,20:28:38,$HST:File FRQ00470.CFG read
10/11/2022,20:28:39,$HST:No calibration file found
10/11/2022,20:28:39,$HST:Plot buffer erased...
10/11/2022,20:28:39,$HST:Parametrisation RCU
10/11/2022,20:28:39,$CRX:V1.8 / 2012-04-02
10/11/2022,20:28:39,$HST:Found LO=25.43 MHz
10/11/2022,20:28:39,$CRX:Debug=Off
10/11/2022,20:28:39,$CRX:Trigger=Extern
10/11/2022,20:28:39,$CRX:FPUcodex=2
10/11/2022,20:28:39,$CRX:GS =0
10/11/2022,20:28:39,$CRX:GA =624
10/11/2022,20:28:39,$CRX:Delay=0msec
10/11/2022,20:28:39,$CRX:Frequency=45.0MHz
10/11/2022,20:28:39,$HST:Receiver connected
10/11/2022,20:28:39,$CRX:Sweeplength=200
10/11/2022,20:28:39,$CRX:low_band_max=171MHz
10/11/2022,20:28:39,$CRX:mid_band_max=450MHz
10/11/2022,20:28:39,$CRX:high_band_max=863MHz
10/11/2022,20:28:39,$CRX:Idle=0
10/11/2022,20:28:39,$CRX:V1.8 / 2012-04-02
10/11/2022,20:28:39,$HST:Found LO=25.43 MHz
10/11/2022,20:28:39,$CRX:Debug=Off
10/11/2022,20:28:39,$CRX:Trigger=Extern
10/11/2022,20:28:39,$CRX:FPUcodex=2
10/11/2022,20:28:39,$CRX:GS =0
10/11/2022,20:28:39,$CRX:GA =624
10/11/2022,20:28:39,$CRX:Delay=0msec
10/11/2022,20:28:39,$CRX:Frequency=45.0MHz
10/11/2022,20:28:39,$HST:Receiver connected
10/11/2022,20:28:39,$CRX:Sweeplength=200
10/11/2022,20:28:39,$CRX:low_band_max=171MHz
10/11/2022,20:28:39,$CRX:mid_band_max=450MHz
10/11/2022,20:28:39,$CRX:high_band_max=863MHz
10/11/2022,20:28:39,$CRX:Idle=0
10/11/2022,20:29:14,$HST:Param. RCU due to START
10/11/2022,20:29:14,$HST:Actual focuscode 02
10/11/2022,20:29:14,$HST:Enable data transfer
10/11/2022,20:29:14,$HST:Continuous measurement
10/11/2022,20:29:14,$CRX:Started
10/11/2022,20:29:14,$HST:Start new FITS-file
10/11/2022,20:29:14,$HST:Continous measurement
10/11/2022,20:29:20,$HST:XY plot selected
11/11/2022,00:00:00,$HST:Midnight -> memo cleared
11/11/2022,00:00:00,$HST:EOF(logfile)